How to generate an elevation of cabinets in softplan 13

How to generate an elevation of cabinets in softplan 13 manual#

Edit the dimensions that you place on the openings to quickly achieve this. Do not spend time trying to get the openings in their exact location. Place the windows and doors (openings) in their approximate location.When adjusting the vertical dimensions, start editing from the top and move to the bottom of the floor plan. For example, when editing horizontal dimensions, start editing on the left side and move towards the right side of the floor plan. Remember to work from one side of the floor plan to the other.Use the Edit command to set the exact position of each wall using the working dimensions that you added.Edit the wall dimensions to set walls in the exact position. Since you will remove them later on, you do not need to position them accurately.Д¤. вЂ“ These are working dimensions that you will use to accurately set the wall positions. Use the Dimension tool to scan in interior dimensions.Use Auto Dimension to place dimension lines for exterior walls.вЂ“ Do not try to be precise at this time since later steps will add the precision.ДЈ. Sketch in the walls to the approximate length and position to form the room layout you are trying to achieve.For example, for exterior, use 2Г—4/Brick or 2Г—4/Siding. Sketch in the exterior and interior walls. The main floor plan will be created in this Drawing.Дў.A new drawing is already created for you in the Project. Select Create a New Project from the Start Page, or select File В® New В® Folder and enter a name for the project.ДЎ.

In order to locate the drawing you want, be sure that you organize your drawings into a format suitable for your business.ДЎ. As time passes, you will accumulate hundreds of drawings. The section Drawing Management describes two methods that you may want to use to store and organize your drawings.

How to generate an elevation of cabinets in softplan 13 manual#

This is from вЂњSteps in creating a residential planвЂќ in both your manual and the help file: